ABonAir AB512 – 5th Generation 7 Msec Multi Zone
The ABonAir AB512™ wireless video system enables camera teams to transmit video directly from cameras to media centers or OB trucks wirelessly.
Built on a bi-directional radio channel between transmitter and receiver, ABonAir’s systems acknowledge the correct acceptance of each group of pixels, thus providing exceptionally robust and reliable transmission.
7 Msec Delay (Sub Frame Delay)
For live event coverage & multi-camera production
Low delay enables the production of multi-camera and live shows without worrying about the delay caused by the simultaneous operation of different cameras or lip sync.
1U or Portable Receiver for Maximum Flexibility
For fixed setups or a temporary production
ABonAir receivers come in two builds – 1U and portable. Our 1U rack unit is a standard 1.75 inch / 44.50 mm in height and 19 inches / 48.3 cm wide and fits right into your standard rack. It features a frequency knob, display and supports ABonAir FCE (Fiber Coverage Extender). The 1U rack unit is perfect for professional sports and large broadcast events. Our robust portable receiver provides complete mobility. It fits in a Pelican Case and is geared towards single stage events, OB Vans and religious broadcasts.
High Picture Quality
+52dB PSNR with H.264 CODEC technology
ABonAir’s groundbreaking CODEC enables accurate frame encoding at high speeds and excellent picture quality
Teleprompter and Video Return Support
The AB512 system fully supports ABonAir’s Teleprompter and Video Return system: Telepompter – resolution up to 1080i60, Video Return – H.264 compressed videos
Supports All Major Formats and Frame Rates
Works with every camera, for every type of production
ABonAir’s systems support all bit rates and formats so they can be used at any production all over the globe with any camera type. The ABonAir AB512 supports frame rates of: 1080p60, 1080i60, 1080p59.94, 1080p50, 1080PsF23.98, 1080PsF23.98, 720p60, 720p59.94, 720p50 and many more. For details check the Tech Specs above.
If you have a special format or frame rate needs, let us know and we will customize a solution for you.
MIMO
Multiple Input Multiple Output Antenna Array
MIMO is a method for multiplying the capacity of a radio link using multiple transmit and receive antennas to take advantage of multipath propagation. MIMO has become an essential element of wireless communication products, especially those using OFDM.
MIMO specifically refers to a practical technique for sending and receiving more than one data signal simultaneously over the same radio channel by exploiting multipath propagation.
Your Wireless Broadcast Kit
Ready to use in minutes
Single-Zone & Multi-Zone
Fiber Coverage Extender (FCE) support
The AB512™ supports ABonAir’s Fiber Coverage Extender (FCE), which enables connection of a single receiver to multiple FCEs in various venue locations (e.g. Horse Race Track – race track, stables and the winning circle) or even on completely separate sites (e.g. football stadium, basketball arena and swimming pool) all via fiber cables with unlimited range.
CCU Supports Your Current System
Sony, Panasonic, Ikegami, Grass Valley, Hitachi & Black Magic Camera Control Units (CCU/RCP)
Yes, the AB512™ unique data port technology enables it to support all major camera brand manufacturers.
Embedded Intercom
Integrated intercom & IFB using the same RF channel
ABonAir’s products are the only wireless broadcast systems supporting an embedded and integrated intercom for communication between the cameraman and the director on the same RF channel as the video content. The AB512™ does not require an additional RF channel allocation for the intercom or additional equipment support. This reduces cost, setup time and frequency usage.
Wide Coverage
Cover up to 3 km / 2 miles per zone
Optimization of wireless and video requirements and careful radio design combined with advanced MIMO technology enable ABonAir engineers to extend the system range up to a full 3 km / 2 miles with a clear line of sight. In drone applications, where the line of sight is perfect, this range can be extended to 6 km / 3.7 miles.
Unlicensed Frequency
No need to use regulated frequency and pay for frequency
Until a few years ago, only large networks could use wireless equipment because it required purchasing expensive frequency licenses from the regulator. In recent years, however, governments and regulators around the world provide unlicensed frequencies for public use for any purpose – including video transmission – allowing even smaller productions to use wireless links easily and free of charge. To answer this demand, manufacturers started to develop unlicensed solutions. Unlicensed systems’ volume grew and drove cost down, motivating large networks to also use them even though they own frequencies.
Bi-Directional Radio
Per pixel acknowledgement
In uni-directional links, the transmitter sends video content to the receiver without receiving any feedback. In bi-directional links, both transmitter and receiver can send and receive data and control information: a packet acknowledgement mechanism identifies errors and quickly fixes them (by re-transmitting the corrupted data), before the frame is presented. This enables bi-directional solutions to assure that all the data is well received without errors, thus increasing picture quality.
PTZ Support
For remote camera operation
ABonAir systems can control any PTZ controlled camera for remote installation of a camera where a wire connection is not possible, for a fixed or mobile installation.
Gold Mount or V-Lock Battery Mount
Suitable for any production
ABonAir’s systems support both battery types to enable any production and any camera use.
Get a Demo
Experience the best professional wireless broadcast system! Give us your details and we will get back to you shortly.
AB512 Tech Specs
Description
ABonAir’s AB512™ wireless video system enables camera teams to transmit video directly from cameras to media centers or OB trucks wirelessly.
Built on a bi-directional radio channel between transmitter and receiver, ABonAir’s systems acknowledge the correct acceptance of each group of pixels, thus provides exceptionally robust and reliable transmission.
The AB512™ supports ABonAir’s Fiber Coverage Extender (FCE), which enables connection of a single receiver to multiple FCEs in various venue locations (e.g. Horse Race Track – race track, stables and the winning circle) or even on completely separate sites (e.g. football stadium, basketball arena and swimming pool) all via fiber cables with unlimited range.
Video
Latency
7 msec sub frame delay
CODEC
H.264
Video Input
3G-SDI
HD-SDI
SD-SDI
CVBS
Video Formats and Frame Rates
525i29.97 NTSC, 625i25 PAL
720p23.94, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080i50, 1080i59.94, 1080i60
Audio
Analog Input
Mic – +48v Phantom power
Mic – Line Level stereo pair
Mic. – /line
Analog Range
-60dB – +18 dB
Sampling Rate
Analog or embedded SDI @ 48KHz
CCU/RCP/PTZ
Supported CCU/RCP Camera Vendors
Sony, Panasonic, Ikegami, Grass Valley and Hitachi. (Others are available per request.)
Supports PTZ
Robotic Camera Control (Pan-Tilt-Zoom)
Radio
Modulation Modes
OFDM: BPSK, QPSK, 16QAM, 64QAM
FEC
1/2, 2/3, 3/4. 5/6, 7/8
Encryption
AES-128
Frequency Range
5GHz band – 4.9-5.875 GHz
2Ghz band
6.5-7.5 Ghz
Others upon request
Antenna Connector
N-type
Transit Power
Adjustable 50-350mW
FCE Connection
Duplex fiber: single mode or multi mode
Teleprompter and Video Return
Teleprompter
Resolution up to 1080i60
Video Return
H.264 compressed Video
Intercom
Transmitter
Integrated belt pack with IFB output
Receiver
Supports 4-wire and 2-wire configurations
Power Supply
Voltage
10V-14V DC
Transmitter Power Consumption
10W-15W
Portable Receiver Power Consumption
12W
1U Receiver Power Consumption
30W
Transmitter Battery Mounting
V-Lock or Gold Mount
Mechanical Form Factor
Transmitter
Size
23.5cm x 10cm x 4cm
Weight
1.1 kg
Portable Receiver
Size
23.5cm x 10cm x 4cm
Weight
1.1 kg
1U Receiver
Size
19″
Weight
4 kg
Transmitter Connections
SDI Video Input
1 x SD, HD or 3G-SD
1U Receiver Connections
Portable Receiver Connections
Environmental Specifications
Operating Temperature
0° to 40° C (32° to 104° F)
Storage Temperature
-20° to 60° C (-4° to 140° F)
Relative Humidity
0% to 90% non-condensing